Dakota-digital MCL-2002 Bedienungsanleitung

MAN# 650280:D MODEL MCL-2002 TANK MOUNT SPEEDOMETER/TACHOMETER *To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status a

MAN# 650280:D WIRING COLOR CODE FOR GAUGE: 2003 and older HD MCL-2002* Stock harness color Function YELLOW PINK or YELLO

MAN# 650280:D Troubleshooting guide Problem Possible cause Solution Gauge will not light up. Red wire does not have p

MAN# 650280:D SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation

MAN# 650280:D Mounting in a Dash with Cable Drive speedometer and rubber mounts • Remove the dash • Unbolt and unplug the factory gauge •

MAN# 650280:D • Remove the dash • Unclip and unplug the factory gauge • Insure that the rubber gasket is still in the dash or remove

MAN# 650280:D • Remove the dash • Unclip and unplug the factory gauge • Remove the rubber gasket from the factory gauge bezel.

MAN# 650280:D STATUS AND WARNING INDICATORS The right turn, left turn, and high beam indicators are activated by 12 volts at their respecti

MAN# 650280:D The setup menus are entered by holding the switch in while turning the key on. The menus are as follows: Menu Description AUTO

MAN# 650280:D S SET S SET S SET S SET Miles to Next Service setup The service mileage is a countdown mile meter. The service mile display can be

MAN# 650280:D WWWWXXXXArnArnArnArn V Voltage warning setup • Press and release the switch until “WXArn V” is displayed, then press and hold the s

MAN# 650280:D SignaLSignaLSignaLSignaL Tach signal setup • Press and release the switch until “SignaL” is displayed, then press and hold the swit