Dakota-digital LED Tail Lights LAT-NR330 Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

LAT-NR330

LED Tail Lights for 1940-53 Chevrolet Pickup

MAN#650210

Kit includes:

Installation: 40-53 Chevrolet Pickup

1. Remove the screw that holds the lens on and remove from the housing.

2. Remove the light bulb(s) from the socket(s).

3. Disconnect the tail light wires from the vehicle. (If there is no place to disconnect the wires, the

wires will need to be cut and will be spliced to the LED assembly later.)

4. Remove and save the screws that hold the bulb socket bracket in the housing and remove the

bracket from the housing. (Note on some reproduction housings there is only one screw

holding the bracket in place.) Pull the wires from the socket out of the hole in the back of the

tail light housing.

5. Now is a good time to clean the lenses and tail light housings. If the lenses are in poor

condition a replacement set is recommended.

1 2 3

INSTALLATION INSTRUCTIONS LAT-NR330 LED Tail Lights for 1940-53 Chevrolet Pickup MAN#650210 Kit includes: Installation: 40-53 Chevrolet P

Seite 2

6. Work the cable from the LED assembly through the hole in the back of the tail light housing from inside the housing. 7. Place the LED as

Seite 3

LED wires Tail light Red Driver’s Turn Green Passenger’s Turn Green Ground Black 12. Attach the ground wire ring terminal to a good chassis gro

Keine Kommentare

Dakota-digital LED Tail Lights LAT-NR330 Bedienungsanleitung